PictureTel 4500 - Manual (Page 59)

53
Redisplaying a Snapshot
If you want to take another look at a snapshot that you sent or received, you can
redisplay it.
To redisplay a snapshot with the wireless keypad:
Press RECALL SNAPSHOT .
The snapshot appears on your screen. The people at the far-end site wonÕt see
it unless you press
SEND SNAPSHOT again.
To redisplay a snapshot with the QuickPad:
Press SNAPSHOT in the VIEW section of your keypad.
The snapshot appears on your screen. The people at the far-end site wonÕt see
it unless you press
SNAPSHOT in the SEND section of your keypad again.
When you are Þnished viewing the snapshot, press the VIEW FAR END button to
return to viewing the far end.
Using a VCR with Your System
If you have a VCR connected to your Concorde • 4500, you can use it to record a
videoconference or to play a videotape during a videoconference.
Before you follow the steps in this section:
❑ Check that the VCR is properly connected to your Concorde • 4500 and that the
Concorde • 4500 is conÞgured for VCR operation. Check with your system
administrator if youÕre not sure.
❑ Familiarize yourself with how your VCR operates.
Recording a Videoconference
To record a videoconference:
1. Power on the VCR.