Panasonic DBS 824 - Manual (Page 111)

Call Transfer Key Telephone Features
3-24 DBS 824-3.0/3.2-700 Revised April 2000
• The line LED for the outside line on hold flashes green.
• The phone issues intercom dial tone.
• “Hold TRK #XX” (where “XX” is the line number) appears on the
display.
2. Dial the extension number to which the call is to be transferred.
3. When your call is answered, inform the third party of the transfer.
• The EXT LED stops flashing and remains lit.
• “Talk-EXT XXX” (where “XXX” is the extension) appears on the
display.
4. Press the PROG key or dial “8.”
• The line LED for the original outside line turns red.
• “TRF XXX TRK #YY” (where “XXX” is the extension and “YY” is
the line) appears on the display.
• The third party need only pick up the handset to speak to the outside
line.
5. Hang up to complete the transfer.
Related Programming
• FF1 (System): Onhook Transfer
• FF1 (System): Extension Transfer Recall Timer for CO Calls
• FF1 (System): Extension Transfer Recall Timer for Intercom Calls
• FF1 (System): Attendant Transfer Recall Timer for CO Calls
• FF1 (System): Attendant Transfer Recall Timer for Intercom Calls
Considerations
• The Attendant can transfer calls while the handset is still in place, even if
the system is not set for Onhook Transfer.
• You cannot transfer a call to an extension that has Do Not Disturb or
Absence Message activated.