Panasonic DBS 824 - Manual (Page 199)

Off-Hook Voice Announce (OHVA) DSLT Features
4-28 DBS 824-3.0/3.2-700 Revised April 2000
3. Upon hearing busy tone, press “5.”
To transfer a call using OHVA
1. Press the HOLD key.
2. Dial the number of the extension to which the call will be transferred.
Your phone issues a busy tone if the extension is already on a call.
3. Press “5” and announce the call to be transferred.
If the transferred call is not accepted by the called extension, press the
FLASH key to cancel the transfer.
4. Press “8.”
5. Replace the handset.
To answer the call from a DSLT:
1. Press CONF to speak with the announcing party.
2. Press CONF again to disconnect the announcing party and return to the
original call.
Related Programming
• FF1 (System): Onhook (Automatic) Transfer
• FF1 (System): Alert Tone for Busy Override & OHVA
• FF1 (System): Extension Class of Service Setting
• FF3 (Extension): Extension Class of Service Assignment
• FF3 (Extension): Call Waiting/OHVA
Considerations
• If Onhook Transfer is enabled, the held call is transferred as soon as the
extension sending the OHVA hangs up.
• If the transferred call is not answered immediately, it will queue for a
specified time and then return to the extension sending the OHVA. (The
recall time is set in the Transfer-Recall Timer.)
• You cannot receive a Call Waiting message during an OHVA.