Panasonic DBS 824 User Manual
Page 151
One-Touch Keys
Key Telephone Features
3-64
DBS 824-3.0/3.2-700
Revised April 2000
To assign access codes to a One-Touch key:
1. Press
the
ON/OFF key.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
2. Press
the
PROG key.
3. Press the One-Touch key to be programmed.
4. Enter the access number.
5. Press
the
REDIAL key.
This inserts a pause between the access code and the telephone number.
6. Press
the
HOLD key.
7. Press
the
ON/OFF key.
The ON/OFF LED goes off.
To check a programmed One-Touch key:
1. Press
the
ON/OFF key.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
2. Press
the
CONF key.
“C” appears in the display.
3. Press the One Touch key to be checked.
The programmed data appears on the display.
4. Press
the
ON/OFF key.
• The ON/OFF LED goes off.
• The date and time appears on the display.
Considerations
• If the pause following an access code is too short, press the REDIAL key
more than once.