Panasonic DBS 824 - Manual (Page 137)

Line Appearances Key Telephone Features
3-50 DBS 824-3.0/3.2-700 Revised April 2000
Operation
Related Programming
• FF1 (System): Least Cost Routing (LCR) Access
• FF1 (System): Alert Tone for Busy Override and OHVA
• FF1 (System): Extension Class of Service Setting
• FF2 (Trunks): Pooled Trunk Access for Group “9”
• FF2 (Trunks): Pooled Trunk Access for Group “81-86”
• FF3 (Extension): Forced Least Cost Routing
• FF3 (Extension): Extension Class of Service Assignment
• FF3 (Extension): Busy Override Send
• FF3 (Extension): Busy Override Receive
• FF3 (Extension): Page Group (0-7) Extensions
• FF5 (Keys): FF Key Assignments (all)
• FF8 (LCR): LCR Setting (all)
Considerations
• Users can barge into a busy Direct Line (DL) and create a three-party
conference. To barge into a busy Direct Line, the user presses the DL key.
(The DL key will be lit red.)
• “Barge-in for Direct Lines” is controlled by the program settings for Busy
Override. For instance, if an extension with a DL key does not want the DL
broken into, that extension must have “Busy Override Receive” turned off.
Operation Action
To originate a trunk call ... Press an idle DL key.
The key blinks (green) as the call is made.
To place a call on Exclusive Trunk Hold (page 3-29)
... Press the DL key.
To place a call on System Trunk Hold (page 3-15) ... Press the HOLD key.
To transfer a call ... Press HOLD, dial the destination exten-
sion, and then press PROG.