Panasonic UF-8000 - Manual (Page 113)

113
P
roblem S
o
lving
Information Code
When an anomaly occurs, the display may show one of the Information Codes listed below. These will help you to identify
and correct the problem.
Info.
Code
Meaning Possible Action Page
030 Document is misfeeding. 1. Reload the document properly.
2. Remove the document jam.
3. Adjust Original Guide. --
031 Document is too long or jammed.
Document length exceeds 39.4 inches (1 meter) in
"Normal" and "Fine" mode only. The length limitation
for "Super Fine" and "600 dpi" mode, is subject to the
available Memory size.
600dpi
Max. Length is 24 inches (600 mm)
1. Reload the document properly.
2. Remove the document jam.
3. Use proper size document(s). --
061 ADF Cover is open. Close the ADF Cover. --
400 During initial handshake, receiving station did not
respond or communication error occurred. 1. Check with the other party.
2. Reload the document and send again. --
402 During initial handshake, communication error
occurred. Reload the document and send again. --
403 No polling capability at the remote side. Ask remote side to set "POLLED=ON". --
404/405 During initial handshake, communication error
occurred.
Reload the document and send again. --
406 Transmission Password does not match.
Receiving Password does not match.
Received from an unauthorized station in Selective
Reception mode. Check the password or the telephone
number in One-Touch or Abbreviated station. --
407 No confirmation from the receiving station for the
previous page sent. Wait a few minutes and send again. --
408/409 Remote side confirmation of previous page is illegible. Wait a few minutes and send again. --
410 Communication aborted by the transmitting side. Check with the other party. --
416/417/
418/419
Received data has too many errors. Check with the other party. --
422/427 Interface is incompatible. Check with the other party. --
430/434 Communication error occurred while receiving. Check with the other party. --
436/490 Received data has too many errors. Check with the other party. --
456 • Machine received a confidential document or was
requested to be polled of a confidential document
under any of following conditions.
1. Not enough space in memory to receive the
confidential document.
2. Confidential Mailbox is full.
3. While printing received document.
• Machine was requested to relay a document.
1. Print a File List and check the contents.
2. Wait until machine finishes printing. --
638 Power failure occurred during the communication. Check the power cord and plug. --
711 Incorrect LDAP settings. Check the LDAP Server Name, LDAP Log in
Name, LDAP password, LDAP Search Base. 28
29
Continued on the next page...