Panasonic UF-8000 - Manual (Page 68)

68
Advanced Internet Fax Features
Relayed Transmission
Sending Document(s) from a PC to a G3 Fax Machine
Using your email application, you can send any document(s) from your PC as a TIFF-F attachment to one or multiple
G3 fax machines automatically through the Internet Relay Station.
The Internet Relay Station (your machine) must be properly setup with all the required parameters.
To send a Relayed Transmission from your PC using your email application, follow the example below.
• Relay XMT Password: sg-rly
• # + End Receiving Station (with Phone Number): #81331111234 (See Note 1)
• #*+ End Receiving Station (with Abbreviated Dialing Number): #*001 - #*200 (See Note 1)
• #*+ End Receiving Station (with One-Touch Number): #*2001 - #*2080 (See Note 1)
• @ + Relay Station's Host Name + Domain Name: @singapore.panasonic.co.sg
Your PC sends the text document(s) to the Relay email address of the Relay Station with the telephone number of the
End Receiving Station.
After the Relay Station completes its transmission to the End Receiving Station(s), your PC receives a COMM. Journal
from the Relay Station. This Journal confirms whether the Internet Relayed Transmission is successful.
Auto Dialer Number and Program Key Number can be confirmed the Auto Dialer data that is retrieving via Email (see
page 92).
NOTE 1. The "#" and "* (TONE)" symbol must be entered after the Relay XMT Password as it indicates
to your machine that a phone number for the End Receiving Station will follow.
2. If the Relay Station requires a special access number to get an outside line, enter that access
number first, then enter a hyphen (represented by a "-") before entering the full number.
Ex: In the "To:" box of your email application, type the following:
sg-rly#[email protected]
or
sg-rly#*[email protected]