Panasonic UF-8000 - Manual (Page 88)

88
Setting Your Machine
Fax Parameters
161 DNS SERVER 1 Invalid Selecting whether to enable the DNS Server.
*2 Valid
162 TIFF VIEWER URL 1 None Selecting whether to include the URL address in the
email message body.
*2 English
3 English+
Japanese
163 ROUTING HEADER *1 Invalid Selecting whether to add the Header Print information of
the Routing Station on the top edge of each routed
pages.
2 Valid
164 IFAX XMT HEADER
(Email only)
*1 Included Selecting whether to include the header when sending a
document to an addressee in the same Domain as
specified in the Default Domain parameter. (This is
useful when using the machine to scan documents back
to your PC)
Note: When sending to a Domain other than as
specified in the Default Domain parameter, the
header will be included regardless of the
selection.
2 Not included
168 CC/BCC STATION *1 Invalid Selecting whether to allow the CC/BCC email
address(es) to be entered.
2 Valid
169 DHCP CLIENT 1 Invalid Select whether the machine would automatically acquire
the Network Parameters from the DHCP Server. (Such
as IP Address, Subnet Mask, Default Gateway IP
Address,etc.)
Note: If you change the setting of this parameter, turn
the Power OFF/ON.
*2 Valid
170 SMTP
AUTHENTICATION
(See page 89, Note 3)
*1 Invalid If you transmit to the SMTP Server, user name and
password are used for authentication. Selecting "Valid"
allows you to set up the user name and password.
2 Valid
171 POP BEFORE SMTP
(See page 89, Note 3)
*1 Invalid If you transmit to the SMTP Server, POP user name and
POP password are used for authentication.
2 Valid
172 DIRECT IFAX XMT *1 Invalid Selecting whether to be prompted during Auto Dialer
registration if the station you are programming is to
receive Internet Fax directly without going through a
Mail Server.
2 Valid
173 DELIVERY NOTICE
(HOME)
*1 Off Setting the home position of whether to request a
Message Disposition Notification (MDN) for a delivery
processing confirmation indicating that the message
(email) was read, when sending an email/Internet Fax.
This setting will be the default value for the Function
Select Mode (F8-2).
2 On
174 APOP
AUTHENTICATION
(See page 89, Note 3)
*1 Invalid This parameter allows you to encrypt the protocol for the
POP password security when connecting with the POP
Server.
2 Valid
177 XMT FILE TYPE 1 TIFF Selecting whether the document(s) are converted to
TIFF-F or PDF format when Scanning-to-Email, or TIFF-
F format when sending to an Internet Fax.
The default is "PDF" as PDF has become the industry
standard for exchanging documents from computer to
computer (Scan-to-Email). However, PDF format cannot
be used for Internet Faxing (Internet Fax to Internet Fax)
as current Internet Fax specifications do not support
these file formats, and TIFF-F format must be used
when sending to an Internet Fax machine.
(This setting can be temporarily changed when sending
an Internet Fax with the Select Mode (F8-6)
"XMT FILE TYPE/NAME")
*2 PDF
No. Parameter Setting
Number
Setting Comments