Panasonic UF-8000 - Manual (Page 86)

86
Setting Your Machine
Fax Parameters
082 QUICK MEMORY XMT 1 Invalid Selecting whether the machine performs Quick Memory
Transmission.
Invalid : Stores all documents into memory first
before dialing the telephone number.
Valid : Starts dialing the telephone number
immediately after storing the first page.
*2 Valid
088 LINE SELECTION *1 Auto Selecting the transmitting telephone line when the
optional G3 Communication Port Kit is installed.
Auto
: Selects the available telephone line for
transmission automatically.
Line-1 : Selects Line-1 as the only transmitting
telephone line.
Line-2 : Selects Line-2 as the only transmitting
telephone line.
Note: Regardless of the setting selection above, the
unit will answer and receive on both telephone
lines.
2 Line-1
3 Line-2
095 DUPLEX PRINT *1 Invalid Selecting whether the machine performs duplex print
when receiving the document via G3 Fax or Internet Fax.
2 Valid
097 SPECIAL TRAY
No.1 - 2
*1 None Select a Special Tray that will not be used for printing
received faxes (Tray 1 or 2). One Tray must always be
available for receiving Faxes. This setting is available
when the 2nd Paper Feed Module Option is installed.
2 Tray 1
3 Tray 2
099 MEMORY SIZE
(SD Memory Card)
- - Displays the amount of base and optional memory installed.
(Base Memory + Optional Memory)
118 FAX FUNCTION DETECT 1 Invalid Setting the number of digits required to determine the
entered number is a Fax Telephone number.
Upon detecting the specified number of digits, the
machine will automatically switch to the FAX Mode
when it is in the Copier Mode.
2 4-Digit
3 5-Digit
*4 6-Digit
5 7-Digit
6 8-Digit
119 QWERTY KEYBOARD 1 One-Touch Selecting whether the QWERTY Keyboard functions as
a One-Touch Dialing Keys or as Quick Name Search
Keys of the station name.
One-Touch
: Each letter key is assigned with an
Email Address or a Telephone Number
for quick dialing.
Quick Name : Entering the letter(s) of the station
Search
name for quick name search of the
programmed station and quick dialing.
*2 Quick Name
Search
121 Auto Reset Timer 1 OFF Selecting whether the control
2 30 sec. panel reset time.
*3 1 min.
4 2 min.
5 3 min.
6 4 min.
122 DIAL PREFIX (----) Setting the Dial Prefix number (Max. 4-digits). When the
the machine detects a 10-digit telephone number
(excluding any characters; such as "-") being dialed, it
will automatically append the preset Dial Prefix number.
When the telephone number is Less or More than 10-
digits in length, the Dial Prefix number is not appended.
140 LAN RELAY XMT
REQUEST
*1 Invalid Selecting whether the machine performs LAN Relay
XMT Request.
2 Valid
No. Parameter Setting
Number
Setting Comments