Panasonic UF-8000 User Manual

Page 9

Advertising
background image

9

Ge

tting T

o

Kno

w

Y

our

Ma

ch

in

e

NOTE

1. If your machine sounds an alarm (pi-pi-pi) in Step 3 above, this indicates that the Auto Dialer

is Full (More than 50 full email addresses are entered or 50 transmission reservations
including G3 communication jobs have been already reserved).

2. To utilize the Email functions, your machine needs to be set up properly on your network.

Please contact your network administrator for actual network setup.

3. Auto dialer (Address Book or One-Touch/ABBR.) is only available when stations are

registered. (See page 72)

4. When transmitting at S-Fine or 600 dpi, there is a possibility that printing quality may

deteriorate at the remote station due to its reception capability. If this occurs, re-send with
Direct Transmission or use "Fine" Resolution.

5. You can search for another name starting with the same character by scrolling with the Cursor

Keys (

/

).

Select the desired
Transmission setting.
(See the column on
the right)

The document(s) is stored into
memory with a file number. Then
starts sending the document(s).

Transmission settings.

2

3a

3b

3c

4

Verification Stamp

ON : The light is lit.

OFF : The light is off.

Lighter Normal Darker

STANDARD for standard originals
FINE

for detailed originals

S-FINE

for finer detailed originals

600 dpi

for 600 dpi detailed originals

HALFTONE (FINE)

for photo originals with Fine
Resolution

HALFTONE (S-FINE)

for photo originals with S-Fine
Resolution

HALFTONE (600 dpi)

for photo originals with 600 dpi
Resolution

CONTRAST

- [ ] +

(See Note 4)

Quick Name Search Email Addressing

or

One-Touch/ABBR. Email Addressing)

Manual Email Addressing

3d

Directory Search Email Addressing

and/or

and/or

A B C

ADF Tray

Original Guides

A

B

Upper Limit Indicator

(A)

Upper Limit Guide (B)

You can send the same document(s) to
multiple stations. Multiple stations can be
selected by any combination of the Steps
3a (3b), 3c and/or 3d, and then pressing

.

START

(

Adjusting the Contrast of
scanned image data by
pressing cursor keys (

/

).

Advertising