Paradyne 9128-II - Manual (Page 249)

6. Troubleshooting
9128-A2-GB20-60 April 2002 6-13
Two Level-1 Users
Accessing Device Another user with Level-1
security access is currently
accessing the unit.
Be aware that actions of the
other user may override
your test commands and
configuration changes.
Wait until no other Level-1 users
are accessing the unit if testing or
configuration will be performed.
Yellow at DSX-1 A yellow alarm signal is
received on the DSX-1
interface. DTE has detected
a LOS or OOF condition. T Check that the DSX-1 cable is
securely attached at both ends.
T Check the status of the
attached equipment.
Yellow at Network 1 A yellow alarm signal is
received on the network
interface.
T Network cable problem.
T T1 facility problem.
T Check that your network cable
is securely attached at both
ends.
T Contact your network provider.
Table 6-1. Alarm Conditions (7 of 7)
Alarm Condition What It Indicates What To Do
1
nnnn indicates a DLCI number of 16 through 1007.
2
frame relay link is one of the following:
– Net1-FR1. The frame relay link specified for the network interface, Network 1.
– Port-
n . The frame relay link associated with a user data port.
– ISDN Link Name on a non-network ISDN DBM interface.
3 Does not apply to a TS Access Management Link DLCI.