Paradyne 9128-II - Manual (Page 338)

B. SNMP MIBs and Traps, and RMON Alarm Defaults
B-16 April 2002 9128-A2-GB20-60
Traps: RMON-Specific
Two traps are defined to support the Alarm and Events Groups of RMON. See
RMON Alarm and Event Defaults on page B-18 for the default values that will
generate RMON-specific traps.
Table B-8. RMON-Specific Traps and Variable-Bindings
Trap Variable-Bindings Possible Cause
risingAlarm T alarmIndex (RFC 1757)
T alarmVariable
(RFC 1757)
T alarmSampleType
(RFC 1757)
T alarmValue (RFC 1757)
T alarmRisingThreshold
(RFC 1757)
T devLastTrapString
(devHealthAndStatus.-
mib)
Object being monitored has risen
above the set threshold.
String:
‘Change in $variableName
$typeString threshold of
$alarmRisingThreshold by
$(alarmValue –
AlarmRisingThreshold.’ (e.g.,
Octets received on Network T1
frame relay rose to threshold of
1.’)
fallingAlarm T alarmIndex (RFC 1757)
T alarmVariable
(RFC 1757)
T alarmSampleType
(RFC 1757)
T alarmValue (RFC 1757)
T alarmFallingThreshold
(RFC 1757)
T devLastTrapString
(devHealthAndStatus.-
mib)
Object being monitored has fallen
below the set threshold.
String:
‘Change in $variableName
$typeString threshold of
$alarmFallingThreshold by
$(alarmValue –
AlarmFallingThreshold.’
(e.g., Octets received on Network
T1 frame relay fell to threshold of
1.’)