Paradyne 9128-II - Manual (Page 344)

B. SNMP MIBs and Traps, and RMON Alarm Defaults
B-22 April 2002 9128-A2-GB20-60
DLCI Alarm Defaults – Paradyne Area
These alarms apply to all DLCIs on the network interface and can be created
during RMON initialization or when a DLCI is created. They are put into the
Paradyne-defined alarm area.
Table B-12. DLCI Alarm Defaults – Paradyne Area (1 of 2)
Item
Sample
Type
1
MIB/Tag/OID
2
Interval
Event
Type
Rising
Threshold
Default Falling
Threshold
Default
DLCI Inactive
Seconds D MIB: pdn_FrExt.mib (E)
Tag: devFrExtDlciStsInactive-
Secs
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.2.1.2.I.D
900 secs
(15 mins) Rising 1 1
Missing
Latency
Responses D MIB: pdn_FrExt.mib (E)
Tag: devFrExtDlciMissedSLVs
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.1.1.23.I.D
900 secs
(15 mins) Rising 5 5
Rx FECNs D MIB: FR DTE MIB (RFC 2115)
Tag: frCircuitReceivedFECNs
OID: .1.3.6.1.2.1.10.32.2.1.
4.I.D
60 secs
(1 min) Rising 1 1
Rx BECNs D MIB: FR DTE MIB (RFC 2115)
Tag: frCircuitReceivedBECNs
OID: .1.3.6.1.2.1.10.32.2.1.
5.I.D
60 secs
(1 min) Rising 1 1
Congested
Seconds D MIB: pdn_FrExt.mib (E)
Tag: devFrExtDlciSts-
CongestedSecs
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.2.1.6.I.D
60 secs
(1 min) Rising 5 5
Frames
Dropped by
Network D MIB: pdn_FrExt.mib (E)
Tag: devFrExtDlciNetDropFr
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.1.1.20.I.D
60 secs
(1 min) Rising 1 1
1
D = Delta. Indicates that the calculated difference between the current value and the previous value is
contained in the MIB.
A = Absolute. Indicates that the exact value for the item is contained in the MIB.
2 I in the OID = Interface ID of the frame relay link.
D = DLCI number.