Panasonic BL-PA100A - Manual (Page 6)

6
Introduction
Main unit
(1) PLC Indicator
Lights to indicate that the adaptor is connected to the HD-PLC network. For
more information, see page 11.
(2) LAN Indicator
Lights when a LAN cable is connected to the adaptor, and flashes when
data is being sent or received. For more information, see page 11.
(3) MASTER Indicator
Lights when the adaptor is configured as the master. For more information,
see page 11.
(4) SETUP Button
Used to register the adaptor (see page 7) or test the terminal’s network
speed (see page 10).
(5) Mode Selector
The position of this selector during registration (see page 7) determines
whether the adaptor is used as the master or as a terminal.
(6) AC IN
Connects the adaptor to AC power as well as to the HD-PLC network.
(7) FACTORY DEFAULT RESET Button
Used to reset the adaptor and erase its registration (see page 12).
(8) LAN Jack
Connects the adaptor to a network device, such as a broadband router, hub,
computer, etc. (see page 9).
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
BL-PA100A_OI.book Page 6 Thursday, March 16, 2006 4:14 PM