Panasonic BL-PA100A - Manual (Page 9)

9 [For assistance, please call: 1-800-272-7033]
Installation
Connecting adaptors to network devices
Once you have placed the adaptors where you plan to use them and are satisfied
with the network speed test results for your terminals (see page 10), follow the
procedure below to connect your adaptors to your network devices (broadband
router, hub, computer, network printer, network camera, etc.). This will integrate
your HD-PLC network with your home network.
1. Confirm that each adaptor’s AC cord is connected to the adaptor and plugged
into a wall outlet.
2. Connect a LAN cable (sold separately) to each adaptor’s LAN jack.
• The LAN indicator of each adaptor turns green.
• If an adaptor’s LAN indicator does not turn green, see page 13.
3. Connect the other end of each LAN cable to a network device.
• Avoid connecting more than one adaptor to the same hub or router.
You are now ready to use your computers, network printers, network cameras, etc.
To wall outlet
To network device
BL-PA100A_OI.book Page 9 Thursday, March 16, 2006 4:14 PM