Network settings, Setting the connection speed, Testing of “proxy server settings – Panasonic DMP-BD70V User Manual
Page 18: Setting the proxy server, After performing steps 1 – 3 ( > 17), After performing steps 1 – 3 ( d above)
18
RQT9412
Network settings
Setting the connection speed
When the connection test results in “Fail” after the IP and DNS-IP
addresses are assigned, perform the following settings.
After performing steps 1–3 (> 17)
4 Press [
3, 4] to select “Auto Detect
Connection Speed” and press
[2, 1] to select “Off”.
5 Press [
3, 4] to select “Connection
Speed Setting” and press [2, 1] to
select a connection speed.
≥Select a connection speed in accordance with the environment of
the network connected.
≥When the settings are changed, the network connection may be
disabled depending on the device.
Testing of “Proxy Server Settings”
Always test the connection when new “Proxy Server Settings” have
been made.
1 Press [SETUP].
2 Press [
3, 4] to select “Network”
and press [OK].
3 Press [
3, 4] to select “Proxy
Server Settings” and press [OK].
4 Press [
3, 4] to select “Connection
Test” and press [OK].
“Testing”: The test is in progress.
“Pass”:
The connection is completed.
Press [RETURN] to exit.
“Fail”:
Please check the connection and settings.
Setting the proxy server
In most cases, default settings can normally be used without
making any changes.
Please use this setting when instructed to by your Internet
service provider.
After performing steps 1–3 (D above)
4 Press [
3, 4] to select “Proxy
Address” and press [OK].
5 Press [
3, 4, 2, 1] to select a
character and press [OK].
Text field: shows the text you have entered
Using the numbered buttons to enter characters
e.g., entering the letter “F”
1) Press [3] to move to the 3rd row.
2) Press [3] twice to highlight “F”.
3) Press [OK].
Repeat this step to enter other characters.
≥Press [;] to delete.
6 Press [
∫] when you complete the
entry.
7 Press [
3, 4] to select “Proxy Port
Number” and press [OK].
8 Enter numbers with the numbered
buttons and press [OK].
9 Press [
2, 1] to select “Yes” and
press [OK].
≥The specified ports may be blocked and not be able to be used
depending on the network environment.
In order to restore the default settings
After performing steps 1–3
1) Press [3, 4] to select “Reset to factory preset” and press [OK].
2) Press [2, 1] to select “Yes” and press [OK].
RETURN
Proxy Server Settin
g
s
Reset to factory preset
Proxy Address
Proxy Port Number
OK
0
Connection Test
_
Proxy Address
Space
Finish
Delete
OK
RETURN
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
A B C
D E F
a
b
c
d
e
f
g
h
i
j
k
l
/
= %
+
-
*
# $ &
< > @
m n o
[
]
_
p
q
r
s
(
)
t
u
v
{
}
\ I
w
x
y
z
“
’
:
;
`
^
.
,
?
!
J
K
L
M N O
P Q R S
T U V
W X Y Z
0 -- 9
G H I
~
0
Proxy Port Number
Please input Proxy Server Port Number and
press [OK]. Press [CANCEL] to delete the
selected character. The number will be set to
"0" if all characters are deleted and [OK] is
pressed.
Num
ber
0 - 9
DMP-BD70V-RQT9412_ENG.book 18 ページ ２００９年２月２７日 金曜日 午後７時２３分