Panasonic DMP-BD70V - Manual (Page 19)

RQT9412
19
Inserting or removing media
Inserting or removing a disc
1 Press [ < OPEN/CLOSE] to open the disc tray.
2 Insert or remove the disc
≥Press [< OPEN/CLOSE] again to close the disc tray.
≥DVD-RAM: Remove discs from their cartridges before use.
≥Insert double-sided discs so the label for the side you want to play
is facing up.
Inserting or removing an SD card
Inserting an SD card
1 Pull to flip down the front panel.
2 Insert the SD card into the SD card slot.
≥Press on the center of the card until it clicks into place.
Removing the SD card
Press on the center of the card and pull it straight out.
≥When the card indicator (“SD”) on the unit’s display is flashing, the
card is being read from or written to. Do not turn off the unit or
remove the card. Such action may result in malfunction or loss of
the card’s contents.
Inserting or removing a USB device
Inserting a USB device
≥Before inserting any USB device into this unit, ensure that the data
stored therein has been backed up.
≥Check the orientation of the USB connector and insert it straight in.
≥Some USB devices inserted into this unit may cause this unit to
stop operating. Such USB devices cannot be used on this unit.
1 P u ll to flip do w n the front panel.
2 Insert the USB device into the USB port.
Removing the USB device
Complete all USB device-related operations and p u ll the USB device
straight o u t.
≥When the USB access lamp is flashing, the USB device is being
read from. Do not turn off the unit or remove the USB device. Such
action may result in malfunction or loss of the USB device’s
contents.
Since the physical size of USB devices can vary, please
consider its width when connecting any USB device to this unit.
It is possible that some devices may accidentally activate the
playback button and cause this unit to not operate properly.
– In such cases we recommend using a USB extension cable (not
included).
Inserting or ejecting a video cassette
Inserting a video cassette
– The unit turns on automatically.
Ejecting the video cassette
From the main unit
≥Press
[< EJECT] on the main unit.
– The unit turns on automatically.
From the remote control
≥Press [DRIVE SELECT] to select “VHS” and press and hold [∫] for
3 or more seconds.




Insert the card’s label up, positioning the cut off
corner to the right.


G
e
tti
n
g
star
te
d
DMP-BD70V-RQT9412_ENG.book 19 ページ ２００９年２月２７日 金曜日 午後７時２３分