Panasonic DMP-BD70V - Manual (Page 9)

RQT9412
9
Regarding 24p output
[BD-V]
Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in
60 frames/second in accordance with the display format.
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
NECESSARY CONNECTIONS
≥Connect to a TV supporting 1080/24p input via an HDMI cable.
NECESSARY SETTINGS
≥“24p Output”: “On” (> 34)
Necessary settings for audio output
After connecting to the terminals, perform necessary settings.
≥For more information about settings, refer to page 33, 34.
≥When using the different terminal at the same time, the sound may not be output with the desired audio if the setting is incorrect.
In the following case, set “HDMI Audio Output” to “Off”. (> 34)
– When connecting a compatible amplifier/receiver using DIGITAL AUDIO OUT terminals, and connecting a compatible television using HDMI AV
OUT terminal
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP].
Audio output setting for the various equipment
Below is a table of recommended settings to output high quality audio to the connected equipment. When connecting to equipment not listed below,
change to your preferred settings as necessary.
*1 HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*2 “PCM Down Conversion” is in effect only when connected to an OPTICAL terminal. If the receiver supports 96 kHz sampling frequency, set to
“Off”; if it does not support it, set to “On”.
“BD-Video
Secondary Audio”
“Dolby D/Dolby D +/
Dolby TrueHD”
“DTS/DTS-HD”
1) While stopped
Press [SETUP].
2) Press [3, 4] to select “Audio” and press [OK].
3) Press [3, 4] to select “Digital Audio Output” and press [OK].
4) Press [3, 4] to select “Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD”,
or “BD-Video Secondary Audio” and press [2, 1] to select the option.
Example of connected equipment
TV via HDMI
Receiver via HDMI
Receiver via OPTICAL
Receiver has HD
audio* 1 decoder &
5.1ch speakers
Receiver doesn’t have
HD audio* 1 decoder &
5.1ch speakers
“Audio”
(B 33)
“Digital Audio
Output”
“Dolby D/Dolby D
+/Dolby TrueHD”
“PCM” “Bitstream” “PCM” “PCM”
“DTS/DTS-HD” “PCM” “Bitstream” “PCM” “PCM”
“BD-Video
Secondary Audio”
“Off” “Off” “Off” “Off”
“PCM Down Conversion” — — — * 2
“Downmix” “Stereo” “Surround encoded” “Surround encoded” “Surround encoded”
RETURN
Audio
Dynamic Range Compression
Digital Audio Output
PCM Down Conversion
Downmix
OK
Off
Off
Stereo
G
e
tti
n
g
star
te
d
RQT9412~Body_mst.fm 9 ページ ２００９年３月３日 火曜日 午前１１時２５分