Panasonic DMP-BD70V - Manual (Page 20)

RQT9412
20
Playback
Basic play (Playing video contents)
Instructions for operations are generally described using the remote
control in these operating instructions.
Preparation
Turn on the television and select the appropriate video input on the
television.
1 Press [ Í POWER] to turn on the unit.
2 Insert the media (> 19).
Play starts.
≥If play does not start, press [1] (PLAY).
≥If a media
w ith data in different file formats is
inserted, the file selection men u is displayed.
Press [3, 4] to select the desired file format and press [OK].
≥If the menu is displayed, press [3, 4, 2, 1] to select the item and
press [OK].
≥If the screen prompting you to use the color buttons appears,
continue to operate with the color buttons on the remote control.
≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫] when you finish to preserve the unit’s motor
and your television screen.
≥The producers of the disc can control how discs are played. So you
may not always be able to control play as described in these
operating instructions. Read the disc’s instructions carefully.
≥When playing a set of two or more BD-Video discs, the menu
screen may continue to display even if the disc has been ejected.
To switch drives
Press [DRIVE SELECT] to select “BD/DVD/CD”, “SD card”, “USB
device” or “VHS”.
≥If a media is inserted while the unit is stopped, the drive switches
automatically depending on the inserted media.
To display menus
[BD-V] [AVCHD] [DVD-VR] [DVD-V]
Press [TOP MENU/DIRECT NAVIGATOR].
To show Pop-up menu
[BD-V]
The Pop-up menu is a special feature available with some BD-Video
discs. This menu may vary with discs. For the operating method,
refer to the instructions for the disc.
1) Press [POP-UP MENU].
2) Press [3, 4, 2, 1] to select the item and press [OK].
≥Pop-up menu also appears by pressing [SUB MENU] and selecting
“Pop-up Menu”.
≥Press [POP-UP MENU] to exit the screen.
Other operations during play
(These functions may not work depending on the media.)
About the Video cassette D 26, “Playing a video cassette [VHS]”
Stop
The stopped position is memorized.
Resume play function
Press [1] (PLAY) to restart from this position.
≥The position is cleared if the tray is opened or you press [∫] several
times to display “STOP” on unit’s display.
≥[BD-V]: On BD-Video discs including BD-J (> 50), the resume
play function does not work.
≥[CD] [MP3] [MPEG2]: The position is cleared if the unit is turned off.
Pause
≥Press [;] again or [1] (PLAY) to restart play.
Search/Slow-motion
The speed increases up to 5 steps.
≥Press [1] (PLAY) to revert to normal playback speed.
≥For some discs, the speed may not change.
Search
While playing, press [6] or [5].
≥[BD-V] [AVCHD] [DVD-VR] [DVD-V]:
Audio is heard during first level of forward search.
≥[MPEG2]: Audio is not heard during all levels of search.
≥[CD] [MP3]: The speed is fixed to a single step.
Slow-motion
While paused, press [6] or [5].
≥[BD-V] [AVCHD]: Forward direction [5] only.
≥[DVD-VR]: If continued for approx. 5 minutes, slow-motion play
pauses automatically.
Skip
Skip to the title, chapter or track you want to play.
≥Each press increases the number of skips.
Direct Play
During playback, you can access specific recordings or scenes
through direct entry of the numbered buttons.
Play starts from the selected title or chapter.
≥While stopped (the image on the right is
displayed on the screen), the title is designated.
While playing, the chapter is designated.


e.g.,
[BD-V] [AVCHD]
e.g., 5:
[0] B [0] B [5]
15: [0] B [1] B [5]
[DVD-V]
e.g., 5:
[0] B [5]
15: [1] B [5]
STOP
PAUSE
SLOW/SEARCH
DMP-BD70V-RQT9412_ENG.book 20 ページ ２００９年２月２７日 金曜日 午後７時２３分