Panasonic DMP-BD70V - Manual (Page 42)

RQT9412
42
Troubleshooting guide
Card Page
USB
VHS
Network
The capacity of the SD card
decreased.
≥When a BD-Video that supports BD-Live is used, and an SD card is in the slot,
data may be written to the SD card.
23
Music on an SD card cannot
be played.
≥Data that can be played from an SD card are AVCHD, MPEG2 and JPEG data. 7
The contents of the card
cannot be read. ≥The card is not compatible or the contents on the card may be damaged.
≥Turn off and then turn on the unit again.
7
—
The contents of the USB
device cannot be read.
≥Remove the USB device from the USB port and then insert again. If this does not
solve the problem, turn off and turn on the unit again.
≥Check that the USB device is inserted correctly.
≥The format of the USB device or its contents are not compatible with the unit. (The
contents on the USB device may be damaged.)
≥The USB device contains a folder structure and/or file extensions that are not
compatible with this unit.
≥Turn off and then turn on the unit again.
≥USB devices connected using a USB extension cable or a USB hub may not be
recognized by this unit.
≥Some USB devices cannot be used with this unit.
≥If inserted during playback the USB device may not be recognized by this unit.
—
19
7
37
—
—
7
—
USB device cannot be
operated.
≥Turn the power of this unit off once, and turn it back on. 7
On-screen display
indicators for video
cassette playback do not
appear.
≥Select “Automatic“ in “Status Messages“ in the Setup menu.
–Press [STATUS] to show the on-screen display indicators for video cassette
playback.
33
Cannot play. ≥Tapes recorded under a TV system other than NTSC (PAL, SECAM, etc.) cannot
be played.
≥Beginning and end of 3 orU cassettes may not playback.
—
—
The playback screen
flickers.
≥The video head is dirty.
≥The tape is old or damaged. 3
—
There is noise when playing
a video tape.
≥Adjust the tracking.
≥The video head is dirty.
≥The tape is old or damaged.
≥There may be some noise on the screen for cassettes that were recorded in other
than normal mode.
≥You may see a noise around the image when the TV is connected using a HDMI
cable. Adjust the screen size on the TV.
If you cannot adjust the screen size on the TV, the noise will disappear by setting
the “HDMI Resolution” in the Setup menu to “480p”. However, please restore the
setting to the original when playing back in high definition images other than VHS.
26
3
—
—
34
I can’t connect to the
network.
≥Have you subscribed to high speed internet connection? Check that the LAN
cable is properly connected.
≥Have you plugged a telephone cord into the LAN terminal on this unit? Connect
with a straight LAN cable.
≥Confirm the power for the modem or broadband router is turned on.
≥Confirm the network settings. Follow any instructions you may have received from
your ISP (Internet Service Provider) and make changes to the settings.
≥Are the broadband router settings correct? Read the operating instructions for the
broadband router.
≥Is the broadband router and/or modem connected correctly? Check the operating
instructions for each device and connect accordingly.
≥Check the “Network” and “BD-Live Internet Access” settings.
16
16
—
—
—
—
32, 35
VIERA CAST does not
operate or connect.
≥Is the network connection correct?
≥Image of the video contents may be incomplete or may not display depending on
how busy the environment or the connected line is.
16
—
RQT9412~Body_mst.fm 42 ページ ２００９年３月２日 月曜日 午前９時２０分