Panasonic WV-NP472 - Manual (Page 12)

-12-
OPERATING THE CAMERA
You can operate the camera in two ways: from the PC
by way of network, or locally from the camera or system
device.
Access from the PC
Your PC can access the camera to view images and to
set up menus.
Prior to operating from the PC, confirm that connections
are made properly as shown in the previous page,
CONNECTIONS.
1. Start up the PC.
2. Start up the Web browser, Internet Explorer or
Netscape Communicator.
3. Enter the IP address of the camera in the address
bar.
The camera address is set to 192.168.0.10 at the
factory default setting.
4. Press Enter on the keyboard.
5. The main page of the WV-NP472 camera will
appear on the display.
Note: Adobe Acrobat Reader should have been
installed on your PC to open the manual. Visit
the home pages of Adobe Systems Incorpo-
rated.
Preliminary Setup
Prior to connection to the system, you need to set up a
network address for the camera by one-to-one connec-
tion with a PC.
Parameters at the factory default are set as follows.
IP address: 192.168.0.10
Subnet mask: 255.255.255.0
Gateway: 192.168.0.1
HTTP port number: 80
1. Enter an IP address, “http://192.168.0.10” for
example, in the address bar of the browser to dis-
play the main page of the WV-NP472 camera.
ALARM IN
ALARM OUT
AUX OUT
DAY/NIGHT IN
GND
A B
VIDEO OUT
RCV
LINK
10BASE-T/
100BASE-TX
POWER DC 12V
IN
Network Cable (Cross type)
2. Click the Setup Menu button. The authentication
dialog appears.
3. Enter “admin” in the user name line, and you need
not enter the password as the default setting. The
network setup window appears.