Panasonic WV-NP472 - Manual (Page 36)

-36-
You can reset the following data back to the factory
default settings.
Camera Setup
Setup Menu (PC oriented)
HTML files
■ Initializing the Camera Menu
• Move the cursor to CAMERA RESET.
• Hold down simultaneously
L and M buttons for
2 seconds on the camera, or click the All Reset
button on your computer display.
■ Initializing the Setup Menu
• In the power-on state, press the side panel buttons,
J and K simultaneously while holding down the
rear panel button A.
Hold down the button A for 6 seconds. It will take
about 10 seconds to complete the initializing.
Note: Clock calibration is required even after initial-
izing the setup menu.
■ Initializing HTML Files
• In the power-on state, press the side panel buttons,
J and K simultaneously while holding down the
rear panel button B.
Hold down the button B for 6 seconds. It will take
about 10 seconds to complete the initializing.
Note: Never press both the buttons A and B at a time.
INITIALIZING