Panasonic WV-NP472 - Manual (Page 26)

-26-
3. Click the Setup Menu button. The User Setup win-
dow appears.
• Enter “admin” in the user name column.
• Click the OK button.
■ Network Setup Parameters vs. Connection Type
Connection type Item Description of the parameter
Connection type 1 IP address Enter “192.168.0.XXX” for the IP address (where XXX should
be a number from 2 to 254 except the same IP addresses
already assigned to the PC and any other cameras).
Subnet mask Use the default setting “255.255.255.0” for the subnet mask.
Default gateway No setting required
Network speed Set the network speed.
Use the default setting “auto” for the network speed.
Selectable parameters: auto (default setting), 100 Mbps (full
duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10
Mbps (half duplex)
HTTP port Use the default setting “80” for the HTTP port.
Host name No setting required
DNS Set to OFF.
Primary server No setting required
Secondary server
DHCP Set to OFF.
4. Click the Network button on top of the screen. The
Network Setup window appears.
5. Set parameters for each item in the Network Setup
menu.
The parameters differ depending on the connec-
tion type.