Panasonic WV-NP472 - Manual (Page 6)

-6-
1. The installation should be made by qualified
service personnel or system installers.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Ask
qualified service personnel for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking,
etc. The camera could be damaged by improper
handling or storage.
4. Do not use strong or abrasive detergents when
cleaning the camera body.
Use a dry cloth to clean the camera when dirty.
When the dirt is hard to remove, use a mild deter-
gent and wipe gently. Then wipe off the remaining
detergent with a dry cloth.
5. Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive
detergents. Use lens tissue or a cotton tipped
applicator with ethanol.
6. Never face the camera toward the sun.
Do not aim the camera at bright objects. Whether
the camera is in use or not, never aim it at the sun
or other extremely bright objects. Otherwise,
blooming or smear may be caused.
7. Do not operate the camera beyond the specified
temperature, humidity or power source ratings.
Use the camera at temperatures between –10 °C
and +50 °C (14 °F - 122 °F), and humidity below
90 %. The input power source is 12 V DC.
8. To prevent fire or electric shock hazard, use a
UL listed cable (VW-1, style 1007) for the 12V DC
input terminal.
PRECAUTIONS