Chapter 2 more menus features, Sided copy mode, Basic operation for the 2-sided copy mode – Panasonic WORKIO C213 User Manual
Page 40
40
Chapter 2 More Menus Features
Chapter 2
More Menus Features
2-Sided Copy Mode
z
For information on “1 -> 2”, “2 -> 2”, “Book -> 2”, and “N in 1”, please refer to the Operating Instructions (For
Basic Operations) on the provided booklet.
z
The standard setting of the “2-Sided / Original -> Copy” can be changed. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) on the provided CD-ROM.
z
Special paper such as cardboard cannot be used for 2-Sided copy.
Basic Operation for the 2-Sided Copy Mode
1
Place original(s).
z
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
z
2 -> 1, 2 -> 2, Booklet, Multi-Size Feed, and
Job Build and SADF: From ADF only.
2
Press the Copy key if the machine is
set to other function mode.
3
Select “More Menus”.
4
Select the desired 2-Sided mode.
1 -> 1 :
To clear the 2-Sided Copy Mode
2 -> 1 :
(see page 41)
2 Page :
(see page 42)
Booklet :
(see page 43)
Multi-Size Feed: (see page 45)
z
When “Multi-Size Feed” is selected, only
“1 -> 1” can be selected.
Job Build and SADF (see pages 47 and 48)
For N in 1, 1 -> 2, 2 -> 2, and Book -> 2
Modes
z
Refer to the Operating Instructions (For
Basic Operation) on the provided booklet.
5
Enter the desired number of copies.
6
Press the Start key.
z
When copying from the Platen Glass, place
the next original, and follow the instructions
described on the touch panel display.
z
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.