Panasonic WORKIO C213 - Manual (Page 73)

73
Chapter 2 More Menus Features
5
Determine whether to copy the Front/
Back cover.
6
Select “Cover” until the paper tray to
be used is displayed.
z When changing paper other than the cover
page, select the Copy key, and change the
paper tray.
z
When using color or Special paper for
copying the cover page, place the paper in
the Sheet Bypass or any tray beforehand
and also select the type of paper that you
will be using. If the type of paper is not
selected properly, the quality of the image
may become poor. Refer to the Operating
Instructions (For Basic Operations) on the
provided booklet.
7
Select “OK”.
8
Enter the desired number of copies.
9
Press the Start key.
z
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
Front
Blank
Select to add a Blank
Front Cover.
Front
Copy
Select to add a Copied
Front cover.
Front+Back
Blank
Select to add a Blank
Front and Back Cover.
Front+Back
Copy
Select to add a Copied
Front and Back Cover.