Panasonic WORKIO C213 - Manual (Page 51)

51
Chapter 2 More Menus Features
‰ When the optional 1-Bin Saddle Stitch
Finisher is installed.
Select the stapling position.
‰ When the optional Punch Unit is installed
to the 1-Bin Saddle Stitch Finisher.
Select the punching position.
‰ When the optional 1-Bin Finisher is
installed. Select the stapling position.
5
Enter the desired number of copies.
6
Press the Start key.
z
When copying from the Platen Glass, place
the next original and follow the instructions
described on the touch panel display.
z
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
2 positions on the left side.
1 position on the upper left side.
2 positions on the upper side.
2 positions on the right side.
1 position on the upper right side.
1 position on the upper left
side.
1 position on the upper
right side.