Panasonic WORKIO C213 - Manual (Page 90)

90
Chapter 3 Other Features
Reserving the Next Copy Job while the
Current Copy Job is Progressing
The next copy job can be reserved while the current copy job is under way.
z If Hard Disk Drive is not installed, this function is not available.
(Hard Disk Drive is standard equipment for DP-C354/C264. It is optional equipment for DP-C323/C263/C213.)
z The previous copy job settings can be saved if the Function Parameter “41 Reserve a Job Settings” (Copier
Settings > Key Operator) is set to “Save”. This is useful when using the previous copy job settings to the next
copy job.
z
To save the previous copy job settings, refer to Copier Settings (For Key Operator) in the Operating
Instructions (For Function Parameters) on the provided CD-ROM.
1
Place the next original while copying
current job.
2
Select “Reserve a Job”.
3
Select copy features if necessary.
4
Enter the desired number of copies.
5
Press the Start key.
z
While the current job is progressing, the
next copy job will be scanned and stored
into the Hard Disk Drive.