Chapter 2 more menus features – Panasonic WORKIO C213 User Manual

Page 44

Advertising
background image

44

Chapter 2 More Menus Features

2 Select a cover type.

z

When “Blank” is selected as the cover type,
up to 36 originals can be placed on the ADF.

3 Select “Cover” to select a paper.

z

When changing paper other than the cover,
select the Copy key on the Control Panel. If
the paper of desired size is available on the
tray, the display changes.
Select a paper size from the display.

4

Select “OK” to exit the cover settings.

5

Select “OK”.

z

For the following procedure, refer to steps 5
to 6 of Basic Operation for the 2-Sided
Copy Mode
(see page 40).

z

When the Fold Position does not match with
the center position of the copies, set the
binding margin. Refer to General Settings
in the Operating Instructions (For Function
Parameters) on the provided CD-ROM.

z

The stapled copies are delivered to the
saddle tray of the 1-bin saddle finisher as
shown below:

Blank

Not copied on the cover.

Copy

Copied on the cover.

Staple position

Saddle tray

Advertising
This manual is related to the following products: