Inserting the battery – Panasonic DMC-FZ1PP User Manual

Page 12

Advertising
background image

Preparation

12

Inserting the Battery

[Preparation]
• Check that the power switch is set to [OFF]

and the lens is stored.

• Close the flash. (P36)

[Inserting the battery]

1

Slide the lever in the direction of the
arrow to open the Memory Card/battery
door.

2

Insert the charged battery all the way
in, until it is locked.

3

Close the Memory Card/battery door.

[Removing the battery]

1

Open the Memory Card/battery door.

2

Slide the lock

1 in the direction of

the arrow to remove the battery.

3

Close the Memory Card/battery door.

• If you will not be using the camera for a long

time, remove the battery.

• When the fully charged battery is inserted in the

camera for more than one hour, the clock setting
is memorized by the camera for about 24 hours
even after the battery is removed. (The time may
be shorter if the battery is not charged
sufficiently)
When the clock setting is cancelled, please set
the date/time again. (P27)

• When the card is being accessed, do not open

the Memory Card/battery door.

• The battery supplied with this camera is

exclusively designed for this camera. Do not use
with any other equipment.

CAUTION

Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type recommended by
the manufacturer. Dispose of used
batteries according to the manufacturer’s
instructions.

OPEN

1 3

2

1 3

2

1

1

Advertising