Turning power on/off – Panasonic DMC-FZ1PP User Manual
Page 17
Preparation
17
Turning Power on/off
1
Set the power switch to [ON].
• The power indicator
1 lights.
2
Set the power switch to [OFF].
ª Power indicator
Lighting:
• When turning the power switch to [ON]
Blinking:
• When the Memory Card/battery door is
opened
• When the card is not inserted
• When no space is left on the card
• When the card is protected during recording
• When you start recording with the lens cap
attached
• When the remaining battery power is low
(blink slowly)
• When turning on the power in the recording mode, do not put any obstacle in front of the
lens.
• Please be sure to remove the lens cap before you switch on the camera in recording mode.
If not, the message “REMOVE LENS CAP AND PRESS SET BUTTON” appears on the
LCD monitor/Viewfinder. Please remove the lens cap and press
4/[REVIEW/SET] button
2.
• Do not make a pressure on the lens when the lens barrel comes out. Confirm that the lens
is put in when you wipe the lens.
OFF
≥
≥
ON
1,2
OFF
≥
≥
ON