Connecting to a pc – Panasonic DMC-FZ1PP User Manual
Page 84
Technical use
84
Connecting to a PC
[Preparation]
• Only if using Windows
®
98 or Windows
®
98
Second Edition, start the supplied CD from the
PC and install the USB driver.
1
Insert the Memory Card into the
camera, and turn the power switch to
[ON].
2
Connect the camera to a PC via the
supplied USB connection cable
1.
[Windows]
The drive is shown on the [My computer]
folder.
• If it is the first time you are connecting the
camera to a PC, the required driver is
installed automatically so that the camera
can be recognized by the Windows Plug and
Play, then it is shown on the [My computer]
folder.
[Macintosh]
The drive is shown on the screen.
• When connecting to a PC, we recommend using the AC adaptor as the power source.
(P14)
• When connecting to a PC, pictures and sounds are not output from the A/V out socket.
• For further information, read the supplied operating instructions for PC connection.
USB
A/V
OUT
ACCESS