Panasonic DMC-FZ1PP - Manual (Page 83)

Technical use
83
Playing Back Images with a TV Monitor
By connecting the camera to a television via
the supplied A/V cable
1, it is possible to
view and play back the recorded images.
[Preparation]
• Turn the camera and the television off.
1 Connect the A/V cable to the A/V OUT
socket of the camera.
2 Connect the A/V cable to the video in
and the audio in sockets of the TV.
• Yellow: to the video in socket
• White: to the audio in socket
3 Turn the television on and select
external input.
4 Turn the camera on and then set the
mode dial to playback [ ].
• The image is displayed on the television.
ª Viewing images in other countries
When setting [VIDEO OUT] on the menu, you can view images on the TV in other
countries (regions) which use the NTSC or PAL system.
• Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still NTSC.
• When connecting to a TV, we recommend using the AC adaptor as the power source. (P14)
• Do not use any other cables except the supplied one.
• Read the TV operating instructions too.
USB
A/V
OUT