Panasonic DMC-FZ1PP - Manual (Page 14)

Preparation
14
Connecting to an Electrical Outlet
If you use an AC adaptor as indicated in 3,
you can use the camera without worrying
about battery discharge.
[Preparation]
• Check that the power switch is set to [OFF]
and the lens is stored.
1 Connect the AC cable.
2 Open the DC IN terminal door 1.
3 Connect the DC cable (supplied) to
the camera.
• The camera becomes warm during use.
However, this is not a malfunction.
• Disconnect the AC adaptor and DC cable when
the camera is not in use.
• The battery cannot be charged in the camera
with the AC adaptor connected.
• Use the supplied DC cable.
2
3
DC IN
1