Philips MAGIC 5 ECO PPF 695 - Manual (Page 11)

Initial Operation 11
EN
Connecting the Telephone Cord
Connecting the Telephone Cable
Connecting the Telephone Cable
Connect the telephone cable to the device by inserting it in
the socket designated with
LINE (RJ-11-Connector). In-
sert the telephone plug into your PTT line socket.
Connecting the Telephone Cable
PABX Systems 1
Connecting the Power Cord
Mains Voltage at Setup Location
Device power cord
Connecting power cord of the device
Connecting the Mains Cable
Insert the mains cable into the connection located on the
rear side of the device. Connect the mains cable to the elec-
trical socket.
Connecting the Power Cable
Charging station power cord
Connecting the power cord of the charg-
ing station
Connect the mains cable of the charging station to the
electrical socket.
Ladestation anschließen
Initial Installation
Starting Initial Installation
After you connect your device to the mains voltage, the in-
itial installation commences. Press
i. Your device prints
a help page.
Selecting the Language
1 Use
[ to select the desired display language.
2 Confirm with
OK.
Selecting the Country
Setting the Country Correctly
Setting the Country
1 Use
[ to select the country in which you are operat-
ing the machine.
2 Confirm with
OK.
After this input, the machine prints another help page and
checks the telephone line.
Entering Your Number
Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
Entering Your Number
1 Enter your number. Using
# or * you can enter a
plus sign.
2 Confirm with
OK.
Entering Your Name
Entering Your Name
1 Enter your name. You can enter characters using the
numeric keys (see button labels). Enter special charac-
ters using
0. Press the respective button several times
until the desired character or special character appears
on the display.
2 Confirm with
OK.
After the input, the machine prints an overview of the
functions.
Entering the Time and Date
Entering Time/Date
1 Enter the time, e.g.
1400 for 2 pm.
2 Enter the date (two digits each) e.g.
080607 for 8 June 2007.
3 Confirm with
OK.
Help 2 · Initial Installation Process
Your device is an analogue fax device (Group 3). It is
not an ISDN device (Group 4), and therefore it can-
not be operated directly on an ISDN connection. In
order to do this, you need either an analogue adapter
or a connection for analogue terminals.
If you connect your device as extension to a tele-
phone system, you must set it for working as an ex-
tension (also see Chapter "Telephone connections
and additional devices, page 43).
Check whether the mains voltage of your device (in-
dicated on the type label) matches the mains voltage
available at the setup location.
Always set the country in which you are operating
the machine. Otherwise, your machine is not adapt-
ed to the telephone network. If your country is not
included in the list, you must select a different setting
and use the correct telephone cable for the country.
Consult your retailer.
You can move the cursor using
[. Use C to de-
lete individual characters.
You can restart the initial installation process any
time. Press
i and 2.