Philips MAGIC 5 ECO PPF 695 - Manual (Page 45)

Telephone Lines and Additional Devices 45
EN
Using Additional Telephones
(Easylink)
Easylink
With the Easylink function you can control your device
with additional telephones. To use this function, addition-
al telephones must be set to the tone dialling mode (DT-
MF/MFV tones) (for this purpose see the operating man-
ual of your additional telephone).
Starting Fax Reception
If you pick up at an additional device and hear that you are
receiving a fax (whistling tone or silence), you can start the
fax reception by pressing
*5 on the additional tele-
phone or pressing
START on the device.
Taking Over the Line
If you pick up on an additional telephone and the machine
continues to ring or attempts to receive a fax, you can dis-
connect the machine from the line. Press
** on the
additional telephone.
Changing Code
Easylink Codes
1 Press
OK, 54 and OK.
2 Enter the new code for starting fax reception.
3 Confirm with
OK.
4 Enter the new code for taking over the line on an addi-
tional device.
5 Confirm with
OK.
Only change the codes if it is absolutely necessary.
The codes must begin with
* or # and must be
different.