Panasonic DMR-EX95V - Manual (Page 13)

69
Yes No
Auto-Setup Restart
No stations found !
Please check aerial connection.
Restart Auto-Setup ?
SELECT
RETURN
ENTER
Connection of Set Top Box or satellite receiver
1 Connect the aerial (SAT) to the LNB IN (aerial input) of the external unit.
2 Connect the RF OUT (aerial output) of the external unit with the RF IN (aerial
input) of the DVD Recorder.
3 Connect the RF OUT (aerial output) of the DVD Recorders with the RF IN (aerial
input) of the television unit.
4 Connect the AV1 terminal (21-pin Scart terminal) of the DVD Recorder with the
Scart input of the television unit.
5 Connect the external unit with a 21-pin Scart cable to the Av2 connection of the
DVD Recorder.
6 Connect the DVD Recorder, the TV and the external unit to the power supply
system.
7 Switch on the external unit and the DVD Recorder.
If you receive your television programme via a satellite receiver (digital/analogue),
connect your DVD Recorder as a downstream unit.
If your television supports Q Link, use a fully wired 21-pin Scart cable to connect it to
the TV. The stations automatically downloaded through [Download from TV].
If your television supports RGB, set the AV1 Output to RGB 1 or RGB 2 in the
[Setup] menu.
!
[Auto-Setup] follows automatically and it ends with the note: [No stations found !].
! Select [No] with and confirm with ENTER.
The available stations are downloaded from the external unit.
! Select with the required TV picture format and confirm with ENTER.
! Switch the DVD Recorder to AV2 with CH . You see the television picture from
the external unit.
Turn on the television and select the AV input that this unit is connected to.
The date and time are not set automatically. Set them manually.
View / record satellite programmes
! Press INPUT SELECT to select the input channel AV2 or put this unit in standby
mode.
Connecting to a television and satellite receiver B
13
The TV Guide does not show any information if you have connected the unit to a
satellite receiver only.