Panasonic DMR-EX95V - Manual (Page 9)

AUDIO OUT
L
R
OPTICAL
VIDEO OUT
S VIDEO OUT
COMPONENT VIDEO OUT
Y
P
P
B
R RF OUT
RF IN
AV 2 (EXT) AV 1 (TV)
AC IN
AV OUT
1 2 4 5 6 7 3 8 9 10 11
9
Rear Panel
For a conventional tube television, we recommend using the Scart terminal. You retain a high-quality RGB video picture with an RGB-compatible television.
! If you want to use a progressive-capable LCD/plasma television or LCD projector, connect it to COMPONENT VIDEO OUT to get a high quality
progressive video picture.
The outputs of 3, 4, 5, 8 and 9 are dedicated to modules of digital signal processing (DVD).
The video and audio outputs of 6 and 7 are dedicated to modules of digital (DVD) or analogue (VHS) signal processing.
Both groups of outputs are used for analogue and digital sources. But there are limitations, e.g.: During recording or scheduled recording on DVD, the VHS
playback is only possible on outputs of 6 and 7.
1 2
HDMI AV OUT
Digital audio output
3 4
5 6
7 8
9
10 11
COMPONENT VIDEO OUT Y
P
B
P
R
AV1 (TV)
L
R
AV2 (EXT)
VIDEO OUT
Y = Luminance signal (brightness)
P = Chrominance signal (colour difference)
B
P = Chrominance signal (colour difference)
R
AV1 (TV) = 21-pin Scart terminal
TV connection
AV2 (EXT) = 21-pin Scart terminal
External unit connection
OPTICAL
Digital audio output AC IN~ = Power supply
RF IN
Aerial input RF OUT
Aerial output
S VIDEO OUT
S VIDEO output terminal
Connection for the AC mains lead.
Audio output, right/left channel
Video output
AUDIO OUT