Panasonic DMR-EX95V - Manual (Page 69)

FUNCTIONS DVD HDD VHS
L CK O
SD
Active Antenna
[On] [Off]
99 64
SETUP Setup FUNCTIONS To Others
Tuning
Disc
Picture
Sound
Display
Connection
Others
VHS
Setup TV Aspect
Progressive
TV System
4:3
Off
PAL
AV1 Output Video
AV2 Settings
Connection Setting ENTER ENTER Option
AV2 Settings
AV2 Input
[RGB / Video] [RGB] [Video] [S Video]
AV2 Input
Ext Link
Ext Link
[Ext Link1] [Ext Link 2]
HDMI Settings
HDMI Settings
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
AV2 Input RGB / Video
AV2 Settings
SELECT
RETURN
ENTER
VHS RGB / Video
AV2 Input
RGB
Video
S Video
Ext Link Ext Link 2
Settings
RGB / Video: Is detected automatically.
RGB, Video, S Video: Input is switched to the selected signal.
TV Aspect [16:9] [4:3] [Letterbox]
Progressive [On] [Off]
TV System [PAL] [NTSC]
Select the TV screen format of your television. Programmes in 16:9 format are recorded
in 4:3 format. 16:9 format is used to record to RAM.
Letterbox: Black bars appear on the upper and lower edges of the screen.
On: The signal is displayed in full-picture quality using COMPONENT VIDEO OUT.
PAL: You connect the unit to a PAL- or multi-system television. Programmes that were
recorded with NTSC are played as PAL60.
NTSC: You connect the unit to an NTSC television. Programmes that were recorded
with NTSC are played as NTSC.
AV1 Output
[Video ( with component )]
[RGB 1 ( without component )]
[RGB 2 ( without component )]
RGB 1 ( without component ): RGB output is available all the time while this unit is on.
RGB 2 ( without component ): RGB output is available only during playback or
on-screen display. If RGB 1 or 2 is set, there is no signal available on COMPONENT
VIDEO OUT.
Video ( with component ): Factory-default settings
AV-Link function
Switching between television reception and
the signal from the DVD Recorder. This
function is only possible if the AV1 Output is
set to [Video ( with component )] or
[RGB 2 ( without component )].
DVD recorder signal: Press
ENTER + 0.
DVD appears on the display.
Television reception: Press the buttons again.
TV appears on the display.
Perform the settings in the
following submenus for the
connected unit.
Ext Link 1: For digital receivers that send a special recording control signal, for
example, the F.U.N. receiver (TU-DSF41)
Ext Link 2: External recording control for satellite or digital receivers (video signal).
HDMI (High Definition Multimedia Interface) is a digital interface for Audio and Video.
One single cable transfers both digital video data (picture data) and also digital audio
data. There is no longer any need to convert analogue-digital or digital-analogue. HDMI
works without data compression so that there is therefore no quality loss from the
system.
Active Antenna Off
If the unit is connected to HDMI, [Video ( with component )] is switched on automatically.
On: when connecting an aerial supplied via the power circuit of the DVD Recorder. Start
the Auto-Setup again after making the adjustment and check the Signal Condition.
Changeover not possible when HDMI Video Format is set to [Automatic] and when
using the HDMI connection.
69
99 70
Not NTSC:
RGB / Video, S Video, Ext Link 1, Ext Link 2