Panasonic DMR-EX95V - Manual (Page 71)

FUNCTIONS
SETUP Setup FUNCTIONS To Others
DVD HDD VHS
L CK O
SD
Remote Control
Change the code of the remote control so that you can simultaneously
operate another Panasonic DVD unit.
Power Save
Quick Start
[On] [Off]
[On] [Off]
[DVD 1] [DVD 2] [DVD 3]
6
Others Setting ENTER ENTER Option
Initialize
[Shipping Condition] [Default Settings]
Shipping Condition: All settings, except for the security levels with the associated
password, the time settings and the owner ID are reset to the factory-default settings.
Default Settings: All settings, except for the programmed channels, time, country,
language and disc language settings, the security levels including password, the
remote control code and the owner ID are reset to the factory-default settings.
Clock
Setup
Tuning
Disc
Picture
Sound
Display
Connection
Others
Remote Control
Clock
Power Save
DVD 1
Quick Start On
VHS
DivX Registration
System Update
TAB
SELECT
RETURN
Off
ENTER
RETURN
DivX ( R ) Video On Demand
DivX Registration
Your registration code is : 9X34TTKW
To learn more visit www.divx.com/vod
Initialize
On: Power-save feature in Standby mode.
The brightness of the display field in power-save mode cannot be changed.
The Quick Start setting is set to [Off]. If you want to connect an external unit via the
AV2 Scart terminal, the DVD Recorder must be switched back on from Standby mode.
Off: The brightness of the display field can be changed.
On: The unit switches on from Standby mode in approx. 1 second.
In Standby mode, more power is used and Power Save is set to [Off].
DivX Registration
In order play purchased or borrowed DivX files on this unit, you need the individual
registration code for the unit. The code is displayed here. Please write it down.
On
Clock
Automatic
Please set the clock.
ENTER : access RETURN : leave
ENTER
CHANGE
RETURN
Time Date
10 52 04 20 03 2006 : : . .
Under adverse reception conditions, etc., the Automatic time correction function may not
work. In this case the indication for Clock setting is automatically reset to [Off]. If the
reception conditions improve later on, it is possible to activate this function.
If the Clock setting is set to [On], do not set it to [Off], otherwise the automatic time
correction function is deactivated.
This DVD Recorder uses a 24-hour-clock.
In the event of a power failure an automatic back-up system maintains the clock for
approximate 60 minutes.
When the Clock setting is set to [On], the automatic time correction function checks and
if necessary adjusts the time several times every day. The automatic time correction
function only works when the DVD Recorder is in standby, it does not work in the
TimerRecording mode.
Clock setting
The clock will normally be set correctly during Auto-Setup however, under certain
circumstances the DVD Recorder cannot set the clock automatically. In this case follow
the operation steps below to manually set the clock.
! Switch with automatic mode to [Off] and confirm with ENTER.
! Change with and Time and Date.
! Confirm the change with ENTER.
Don't forget to change summer time and winter time.
Activating the automatic time correction function
The correct time for the clock can be automatically maintained when the DVD Recorder
is tuned to a station that transmits a time signal.
! Switch with automatic mode to [On] and confirm with ENTER.
The automatic setting of the clock begins.
71