Panasonic DMR-EX95V - Manual (Page 82)

! Depending on the condition of the disc, even high-speedcompatible discs may not
allow recording at maximum speed.
Unusually loud sounds coming
from the rotating DVD-R etc.
! When recording or high-speed dubbing to a DVD-R, DVD-RW (DVD-Video format)
and +R, the rotation sound is louder than normal. This is not a malfunction.
It is not possible to copy to a
DVD-R etc. in high-speed mode.
! When recording to the HDD (Hard disk drive), set [Rec for High Speed dubbing]
! in the SETUP menu to [On].
Copying even takes a relatively
long time in high-speed mode.
COPYING
66
If you need help
70
69
69
69
70
70
о
.
о
.
Check whether the television set and DVD Recorder are connected correctly with
the HDMI cable. If the external unit has been connected correctly, the HDMI
message appears briefly on the display of the DVD Recorder
î If more than four units are connected with HDMI cables, you may possibly not be
able to see a picture. Reduce the number of connected units.
If the unit is connected via COMPONENT VIDEO OUT to a television unit which is
not progressive-compatible, no unit can be connected with HDMI. The [Progressive]
setting is automatically switched to [On] in the Setup if a unit is connected up with
HDMI
Wrong screen format.
î
.
If a television set is connected via HDMI AV OUT, in the [Setup] menu, set the
setting [Aspect for 4:3 Video] to [4:3]
î Check the setting [TV Aspect] in the [Setup] menu.
Part of the picture appears
duplicated some of the time when
using the output. COMPONENT
VIDEO OUT
î Do not connect this unit to the television set with an HDMI cable.
î In the Setup menu, set the [Progressive] setting to [Off].
No sound
Low volume
Sound with interference
The required audio type cannot be
heard.
.
.
.
î
.
The amplifier connected via HDMI does not support CPPM and the HDMI Ver. 1.1.
Standard. No Multi Audio-Disc can be played back
î The sound is not played back if the Bitstream Signal is output from HDMI AV OUT
or OPTICAL DIGITAL AUDIO OUT.
î If more than four units are connected with HDMI cables, you may possibly not hear
any sound. Reduce the number of connected units.
î If the unit is connected with an HDMI cable to a television set and OPTICAL
DIGITAL AUDIO OUT is used as audio output, in the [Setup] menu, set the setting
[Digital Audio Output] to [Off].
î When one or several units are connected via HDMI AV OUT, it is possible for there
to be interference with the sound. Select another connection type.
HDAVI Control is not working. î In the [Setup] menu, change the setting [Control with HDMI / Q Link] to
[HDMI and Q Link].
Use a fully wired HDMI cable
î The connected unit possibly does not support HDAVI control.
î .
HDMI
Which accessories are required
to hear multi-channel Surround
Sound?
î Multi-channel sound can only be played back with this unit if it is connected with an
HDMI cable or a digital audio optical fibre cable to an amplifier with an integrated
decoder.
Switching on takes longer in spite
of the Quick Start function.
î . All units connected by HDMI are checked while switching on
This can take a while.
No picture on the television set.
Page
82