78 wireless xdp parallel mode, Wireless xdp parallel mode – Panasonic KX-NCP500 User Manual

Page 145

Advertising
background image

•

Whisper OHCA is only available with certain digital proprietary telephones and IP proprietary
telephones. In addition, both you and the other party must use supported telephones.

•

Whisper OHCA is not available for outside calls; only call waiting tone can be set (refer
to "1.3.13 Call Waiting Tone").

•

A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone. (

® 1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory Number)

Extension)

•

For information about answering a waiting call, refer to "1.3.12 CALL WAITING FEA-
TURES".

1.3.78 Wireless XDP Parallel Mode

Your PS can be used in parallel with a PT or SLT.
When in this mode, incoming calls to a wired telephone also ring the paired PS.

To set

PS

Enter extension number
of the paired telephone.

Press CANCEL.

PS

extension no.

Press TALK.

Enter 48.

4

8

1

C.Tone

Enter 1.

To cancel

PS

PS

Press CANCEL.

Press TALK.

Enter 48.

4

8

0

C.Tone

Enter 0.

•

Some wired telephones are prohibited from using this feature.

•

If you go off-hook while your paralleled telephone is in use, the call will switch over to you.

Document Version 2008-09

Operating Manual

145

1.3.78 Wireless XDP Parallel Mode

Advertising