Panasonic KX-NCP500 - Manual (Page 179)

3.2 Manager Programming
3.2.1 Programming Information
The manager can program the following item.
• Other Extensions Control
Available Extension
The extension assigned as a manager
Required Telephone
A Panasonic Proprietary Telephone with display (over 2 lines)
(e.g., KX-NT343, KX-DT346, KX-T7636)
Manager Password
To enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234)
CAUTION
• The PBX has a default password preset. For security, change the password the first time that you
program the PBX.
• It is strongly recommended that a password of 10 numbers or characters be used for maximum
protection against unauthorized access. For a list of numbers and characters that can be used in the
password, refer to "1.3.14 Character Entry".
• To avoid unauthorized access to the PBX, keep the password secret. If it becomes known to others,
the PBX may be misused.
• Change the password periodically.
Conditions
The programming extension must be idle, on-hook and holding no calls.
3.2.2 Manager Programming
Changing the Settings and Extension Control
Follow
programming
input.
To exit To program To enter the program mode
manager
password
Press
HOLD. Press PROGRAM
or PAUSE.
1
Enter 1. Press PROGRAM
or PAUSE.
OR
PROGRAM
PAUSE
OR
PROGRAM
PAUSE
To continue
programming
input
HOLD
Enter manager
password.
Item Programming Input
Changing the manager password. 0 0 + + Password (max. 10 digits) +
Document Version 2008-09 Operating Manual 179
3.2.2 Manager Programming