Panasonic KX-NCP500 - Manual (Page 36)

1.3.3 Alternate Calling—Ring/Voice
The caller can alternate the alerting method, either ring or
voice, when making an intercom call.
On the other hand, any extension can set the alerting method,
either ring or voice, when receiving an intercom call.
Ringing (Default): You can call the other party with a ring
tone.
Voice-calling: You can talk to the other party immediately af-
ter confirmation tone.
Ring
Ring Hello
OR
To change the method
After dialing
Enter .
PT/SLT/PS
Talk.
C.Tone
• Voice-calling from a SIP Extension is not available.
• If the called party uses a SIP Extension, single line telephone (SLT) or portable station (PS),
Voice-calling is not available.
• This feature is not available when the called party’s telephone is in the Voice Call Deny mode.
Customizing Your Phone
•
3.1.2 Personal Programming—Alternate Receiving—Ring/Voice
Select the alerting method, either ring or the other party’s voice.
1.3.4 Automatic Callback Busy (Camp-on)
If a dialed extension or a desired CO line is busy, you can set the telephone to receive callback ringing:
• when a dialed extension becomes idle.
• when your desired CO line that is in use by another extension becomes idle.
You cannot set Automatic Callback Busy for a busy party outside of the PBX.
When you answer the callback ringing:
• For an outside call: The line is seized.
• For an intercom call: The called extension starts ringing automatically.
36 Operating Manual Document Version 2008-09
1.3.4 Automatic Callback Busy (Camp-on)