Panasonic VQT2H52 - Manual (Page 103)

103
VQT2H52
Backup
With other
products
2 Dubbing images onto other
video devices
Images played back on this unit can be dubbed onto a DVD recorder or video device.
≥ Images are dubbed in standard quality.
≥ Use the AC adaptor to free you from worrying about the battery running down.
1
Connect this unit to a video device and then change the mode to .
2
Start playback on this unit.
3
Start recording on the connected device.
≥ To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.
≥ If the date and time display and function indication are not wanted, cancel them before dubbing.
( l 34, 92)
If the dubbed images are played back on a wide-screen TV, the images may be stretched vertically.
In this case, refer to the operating instructions for the device you are connecting to or read the
operating instructions of the wide-screen TV and set the aspect ratio to 16:9.
モバヷ
Change the video input on the
video device and TV that this unit
is connected to.
≥ The channel set will differ depending on
the terminal to which the unit is connected.
≥ See the operating instructions of the video
device for details.
≥ Insert the plugs as far as they will go.
≥ Do not use any other AV cables except the
supplied one.
A AV cable (supplied)
HDCSD10_TM10_TM15P-VQT2H52_eng.book 103 ページ ２００９年７月６日 月曜日 午後１時４６分