Panasonic VQT2H52 - Manual (Page 93)

93
VQT2H52
Select the desired method of HDMI output.
Select the menu. ( l 29)
[AUTO]:
The output resolution is automatically set based on the information from the connected TV.
[1080i]:
The interlace method with 1080 available scan lines is used for output.
[480p]:
The progressive method with 480 available scan lines is used for output.
≥ If the images are not output on the TV when the setting is [AUTO], switch to the method [1080i] or
[480p] which enables the images to be displayed on your TV. (Please read the operating instructions
for the TV.)
Component output setting can be changed.
Select the menu. ( l 29)
[480i]:
When connecting to the component terminal on the TV compatible with 480i.
(Playback is in standard quality.)
[1080i]:
When connecting to the component terminal on the TV compatible with 1080i.
(Playback is in high definition quality.)
Connecting with a HDMI mini cable
What is HDMI?
HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high definition
TV and then play back the recorded high definition images, you can enjoy them in high resolution
with high quality sound.
If you connect this unit to a Panasonic TV compatible with VIERA Link, linked operations
(VIERA Link) are possible. (
l 94)
[SETUP] # [HDMI RESOLUTION] # desired setting
Information from the connected TV Output resolution
720p, 1080i 1080i
Others 480p
Interlace method/progressive method
i= interlace scanning is scanning the screen with half of the effective scanning lines every 1/60
seconds, where p= progressive scanning is a high density image signal that is scanning the screen
with all the effective scanning lines every 1/60 seconds.
Connecting with the component cable
[SETUP] # [COMPONENT OUT] # desired setting
HDCSD10_TM10_TM15P-VQT2H52_eng.book 93 ページ ２００９年７月６日 月曜日 午後１時４６分