Panasonic VQT2H52 User Manual
Page 85
85
VQT2H52
Playback
Editing
5
Copying between SD card and Built-in
Memory
[HDC-TM10/HDC-TM15]
Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in
this unit and a built-in memory.
≥ If the remaining capacity on a single SD card is not enough, you can copy to multiple SD cards
following the instruction on the screen.
In this case, the last scene copied to an SD card is automatically divided to fit the space on the SD
card.
≥ If you divide the scenes (
l 82), and copy by scene selection, it is possible to copy matching the
remaining capacity of the media, or only the necessary parts.
∫ Media information display
¬Change the mode to
and touch the play mode select icon to select desired
media to confirm the media information. (
l 70, 77)
Select the menu. (
l 29)
SD card information display
Built-in memory information display
≥ Touch [EXIT] or press the MENU button to close the indication.
/
≥ The 8 GB/16 GB built-in memory requires some space to store information and manage system files,
so the actual usable space is slightly less than the indicated value. The usable built-in memory space
is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software
are expressed as 1 GB=1,024
k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of
the capacity appears to be smaller.
Confirming remaining capacity on the copy destination
[SETUP]
# [CARD STATUS] # [YES]
[SETUP]
# [Built-in Memory STATUS] # [YES]
HDCSD10_TM10_TM15P-VQT2H52_eng.book 85 ページ ２００９年７月６日 月曜日 午後１時４６分