Panasonic VQT2H52 - Manual (Page 134)

134
VQT2H52
/
When disposing of or giving away this unit,
note that:
≥ Formatting and deletion simply change the file
management information and cannot be used
to completely erase the data in built-in memory
of this unit. The data can be recovered using
commercially available software or the like.
≥ We recommend that you physically format the
built-in memory before disposing of or giving
away this unit.
≥ To physically format the built-in memory,
connect the unit via the AC adaptor, select
[FORMAT Built-in Memory]
# [YES] from the
menu, and then press and hold the delete
button on the screen below for about 3
seconds. When the built-in memory data
deletion screen appears, select [YES], and
then follow the on-screen instructions.
≥ Please look after the data in your built-in
memory carefully. Panasonic will not be held
responsible in the unlikely case that private
data is divulged.
The battery used in this unit is a rechargeable
lithium-ion battery. It is susceptible to humidity
and temperature and the effect increases the
more the temperature rises or falls. In cold areas,
the full charge indication may not appear or the
low battery indication may appear about
5 minutes after starting use. At high
temperatures, the protection function may be
triggered, making it impossible to use the unit.
Be sure to detach the battery after use.
≥ If the battery is left attached, a minute amount
of current continues to flow even if the unit’s
power is off. Keeping the unit in this state may
result in over discharge of the battery. This
may result in you not being able to use the
battery even after it is charged.
≥ The battery should be stored in the vinyl bag
so metal does not come into contact with the
terminals.
≥ The battery should be stored in a cool place
free from humidity, with as constant
temperature as possible. (Recommended
temperature: 15 °C to 25 °C (59 °F to 77 °F),
Recommended humidity: 40% to 60%)
≥ Extremely high temperatures or low
temperatures will shorten the life of the battery.
≥ If the battery is kept in high-temperature, high-
humidity, or oily-smoky places, the terminals
may rust and cause malfunctions.
≥ To store the battery for a long period of time,
we recommend you charge it once every year
and store it again after you have completely
used up the charged capacity.
≥ Dust and other matter attached to the battery
terminals should be removed.
Prepare spare batteries when going out for
recording.
≥ Prepare batteries enough to last for 3 to 4
times the period you are planning to record for.
Cold places such as a ski resort can shorten
recording time.
If you drop the battery accidentally, check to
see if the terminals are damaged.
≥ Attaching a battery with damaged terminals
can damage the unit or AC adaptor.
About the battery
HDCSD10_TM10_TM15P-VQT2H52_eng.book 134 ページ ２００９年７月６日 月曜日 午後１時４６分