Panasonic VQT2H52 - Manual (Page 69)

69
VQT2H52
If auto focusing is difficult due to the conditions,
then use manual focus.
≥ Press the MANUAL button. (
l 66)
1
(When MF assist function is used)
Select the menu. ( l 29)
≥ This function’s default setting is [ON].
2
Touch [MF] icon.
≥ In Manual Focus mode, [AF] icon appears on
the screen.
3
Adjust the focus by touching /
.
The center of the screen is enlarged. The normal
screen returns approximately 2 seconds after
you finish bringing the subject into focus.
≥ The center of the screen is not enlarged when
[MF ASSIST] is [OFF].
≥ To return to Auto Focus, touch [AF] icon or
press the MANUAL button again.
≥ MF assist does not work when the digital zoom
is used.
≥ The part of the screen that is enlarged is not
enlarged on the image actually recorded.
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the
quality of the image.
≥ Press the MANUAL button. (
l 66)
1
Select the menu. ( l 29)
2
Touch the desired setting items.
[SHARPNESS]:
Sharpness of the edge
[COLOR]:
Depth of the color of the image
[EXPOSURE]:
Brightness of the image
3
Touch / to adjust settings.
≥ After adjustments are made, if no operations
are performed for a few seconds, the bar will
disappear.
4
Touch [ENTER].
≥ Touch [EXIT] or press the MENU button to
complete the settings. appears on the
screen.
Manual focus adjustment
[RECORD SETUP] # [MF ASSIST] # [ON]
F IRIS SHTR WB MF
MF
MF
F IRIS SHTR WB MF
MF MF
MF
MF
AF
Picture adjustment
[RECORD SETUP]
# [PICTURE ADJUST]
# [YES]
HDCSD10_TM10_TM15P-VQT2H52_eng.book 69 ページ ２００９年７月６日 月曜日 午後１時４６分