Panasonic DMC-FX48 - Manual (Page 103)

103
VQT1X57
Connecting to other equipment
[PLAYBACK] mode:
¸
Playing Back Pictures on a TV Screen
Preparations:
Set the [TV ASPECT]. (P25)
Turn this unit and the TV off.
1 Yellow: to the video input socket
2 White: to the audio input socket
A Align the marks, and insert.
B AV cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
Connect the AV cable B (supplied) to the video input and the audio
input sockets on the TV.
Connect the AV cable to the [AV OUT] socket on the camera.
Turn the TV on and select external input.
Turn the camera on.
Note
• Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or
the left and right of the pictures.
• Do not use any other AV cables except the supplied one.
• Read the operating instructions for the TV.
• When you play back a picture vertically, it may be blurry.
Still pictures recorded on an SD Memory Card can be played back on a TV with an SD
Memory Card slot.
Note
• Depending on the TV model, pictures may not be displayed on the full screen.
• Motion pictures cannot be played back. To play back motion pictures, connect the camera to
the TV with the AV cable (supplied).
• You cannot play back pictures on SDHC cards if the TV does not support these cards.
• You may not be able to play back MultiMediaCards.
Playing back pictures using the AV cable (supplied)
Playing back pictures on a TV with an SD Memory Card slot
AV
O
UT
/
DIGIT
AL
DMC-FX48P_PC~VQT1X57_eng.book 103 ページ ２００８年１２月２６日 金曜日 午後６時２５分